Automatic Box Packing Cartoning Machine for Foil Paper and Small Rolls

Short answer first: two machines cover the two ends of the job. The LK-BC3115 packs flat products — aluminium foil paper, wet wipes, plastic wrap, oil-absorbing paper, plastic bags — into boxes at 10–50 boxes per minute with one machine and one operator. The LK-C500 packs small foil rolls through a fully automatic cycle: feeding, box opening, loading, glue spraying, sealing and waste removal.

Why the packing step decides your delivery date

Foil paper comes off the printing, folding or rewinding equipment in bulk. What the customer receives is a box. Between those two points sits the step most factories still do by hand: folding the leaflet, loading the box, gluing, sealing, and pulling out the ones that were misfilled.

The three jobs hand packing cannot do reliably

Hold a size tolerance.

• A foam or paper insert has to sit in the same position in every box. Hands drift.

Keep pace with the machine upstream.

• If the folding machine or rewinder outputs faster than the packing table, the packing table sets your production rate.

Catch empty boxes.

• A sealed box with no product inside is not a small error; it is a customer complaint that reaches the end user.

What "automatic" should mean

Not just an automatic box former. The useful definition is a cycle that runs end to end without a person at the machine: feed, form, load, glue, seal, remove waste.

LK-BC3115: box packing for flat products

What it packs

The LK-BC3115 aluminium foil paper packing machine can be adjusted in multiple directions and is suitable for the automatic box packaging of wet wipes, plastic wrap, oil-absorbing paper, plastic bags and aluminium foil.

One machine, one person

The design target is one operator running one machine, which lifts the packaging throughput of aluminium foil paper and turns paper packaging into an automated process rather than a manual bench.

Specifications

The box size range is the number to check first against your product line: a box up to 320 mm long, 190 mm wide and 100 mm high is the working envelope, and the multi-direction adjustment is what makes one machine cover several products instead of one.

LK-C500: the six-step cycle for small rolls

The cycle

The LK-C500 aluminium foil small roll packing machine adopts a single packaging form that runs in sequence: automatic feeding, box opening, box loading, glue spraying, box sealing and waste removal. The structure is deliberately simple to operate and configure.

Empty boxes cannot leave the machine

A photoelectric braking detection and tracking system prevents empty packages from being removed from the box, which saves packaging material rather than sending it out filled with air. For a converter shipping to retail, this is the difference between a rework problem at the packing station and a complaint at the shelf.

Changing from one box to another

Tooling and templates are changed by adjusting, not by rebuilding the machine. There is also an automatic positioning function for items smaller than the box, and a main drive motor overload protective cover. A flip-type safety guard is available on request.

Controls

The machine uses a controller, a touch screen and a PLC programmable control system. The human-machine interface display makes operation more responsive, and braking accuracy is high, which is what keeps the roll or leaflet in register as it enters the box.

Two machines, two product types

FAQ

Q: What products can the LK-BC3115 pack? A: Wet wipes, plastic wrap, oil-absorbing paper, plastic bags and aluminium foil, in box form.

Q: What box sizes does the LK-BC3115 accept? A: Length 100–320 mm, width 100–190 mm, height 30–100 mm, with multi-direction size adjustment.

Q: How fast is the LK-BC3115? A: 10–50 boxes per minute.

Q: What adhesive is used? A: Hot melt adhesive or ordinary glue.

Q: How does the LK-C500 avoid empty boxes? A: A photoelectric braking detection and tracking system prevents empty packages from being removed from the box.

Q: Does changing to a new box size require new machinery? A: No. Tooling and templates are changed by adjustment.

Q: What control system does the LK-C500 use? A: A controller, touch screen and PLC programmable control system.

Q: Is there a safety option on the packing machine? A: Yes. Items smaller than the box size are positioned automatically, the main drive motor has an overload protective cover, and a flip-type safety guard can be configured on request.

Q: What power supply do the packing machines need? A: 380 V, 50 Hz, 3-phase. The LK-BC3115 uses a 1.5 kW servo motor, a 0.25 kW feeding motor and 3.5 kW of heating.

The bottom line

Packing is decided by product form, not by preference. Flat foil paper, wet wipes and plastic wrap go through the LK-BC3115 at 10–50 boxes a minute with one operator. Small aluminium foil rolls go through the LK-C500, where the feeding, opening, loading, gluing, sealing and waste removal happen in one cycle and empty boxes never leave the machine.